Structural Applications:

• Increased live and dead loads in structures

• Enhanced traffic capacity on bridges and viaducts

• Flexibility for changes in building utilization or industrial machinery layout

• Enables the removal of walls, columns, or sections of floor slabs

Advantages:

• Complies with design criteria of ACI 440 and CSA S806

• High strength-to-weight ratio

• Lightweight, adding negligible dead load to the structure

• Non-corrosive, non-magnetic, and non-conductive

Epoxy Glue (TCI 855-R):

• Two-component, 100% solid, room temperature cure thermoset epoxy

• Low viscosity with long pot life characteristics

• Superior tensile and flexural strength

• Glass Transition Temperature (Tg) of 94°C (201°C)

Mechanical & Physical Properties:

• Tensile Strength: 400 Ksi (2,758 MPa)

• Tensile Modulus: 24 Msi (165.474 GPa)

• Elongation at Break: 1.70%

• Temperature Resistance: 300 F (149 C)

• Thickness: 0.0472” (1.2mm)

Installation Guidelines:

• Maintain a dry dehumidified environment with a minimum temperature of 10°F above the dew point.

• Ensure substrate surfaces are at SSD condition before installation.

• Thoroughly clean and prepare surfaces for continuous contact between PrecurStrong and the substrate.

• Apply TCI 855-R epoxy glue and install PrecurStrong, allowing for curing time between layers.

• Apply fireproofing as required by project documents.

• Final cure time: 72 hours before returning to service.